Poco X6 is a smartphone model from Xiaomi that was released in January 2024. It features a 6.67-inch AMOLED display with a resolution of 2712 x 1220 pixels and a refresh rate of 120 Hz. It is powered by the Snapdragon 7s Gen 2 chipset, which is a 4 nm octa-core processor with a clock speed of up to 2.4 GHz.
If you are an Android enthusiast who wants to customize your smartphone with custom ROMs, root access, or other modifications, you will need to unlock the bootloader of your device first. The bootloader is a program that runs before the operating system and kernel, and it controls the boot process and the recovery mode. By default, the bootloader of most Android devices is locked by the manufacturer, to prevent unauthorized changes to the software and to ensure the security and stability of the device.
However, Xiaomi allows its users to unlock the bootloader of their devices, as long as they follow some steps and use the official Mi Unlock Tool. Unlocking the bootloader will give you more freedom and control over your device, but it will also void the warranty, erase the data, and potentially expose your device to risks. Therefore, you should only proceed if you are aware of the consequences and have a clear purpose for unlocking the bootloader.
In this article, we will guide you through the process of unlocking the bootloader of Xiaomi Poco x6.
- A Xiaomi Poco x6 with at least 66% battery charge.
- A Windows PC with an internet connection.
- A USB cable compatible with your device.
- A backup of your important data, as unlocking the bootloader will erase everything on your device.
- The Xiaomi Poco x6 USB drivers, which you can download from.
- The Mi Unlock Tool, which you can download from .
- The Xiaomi Poco x6 fastboot drivers, which you can download from .
Step 1: Enable Developer Options and OEM Unlocking
The first step is to enable the developer options on your device, which will allow you to access some advanced settings and features. To do this, follow these steps:
- Go to Settings > About phone and tap on MIUI version seven times until you see a message saying “You are now a developer”.
- Go back to Settings > Additional settings > Developer options and enable the toggle for OEM unlocking. This will allow you to unlock the bootloader of your device.
- In the same menu, enable the toggle for USB debugging. This will allow your PC to communicate with your device.
Step 2: Bind Your Device to Your Mi Account
The next step is to bind your device to your Mi account, which is required to verify your identity and authorize the bootloader unlocking. To do this, follow these steps:
- Go to Settings > Mi Account and sign in with your Mi account. If you don’t have one, you can create one for free.
- Go to Settings > Mi Account > Mi Cloud and enable the toggle for Find Device. This will allow you to locate your device remotely in case you lose it or it gets stolen.
- Go to Settings > Additional settings > Developer options > Mi Unlock status and tap on Add account and device. This will bind your device to your Mi account and enable the bootloader unlocking option.
Note: After binding your device to your Mi account, you may have to wait for a certain period of time (usually 7 days) before you can unlock the bootloader. This is a security measure to prevent unauthorized unlocking of stolen devices. You can check the remaining time by tapping on Mi Unlock status again.
Step 3: Boot Your Device into Fastboot Mode
The third step is to boot your device into fastboot mode, which is a special mode that allows you to flash firmware and perform other operations using the fastboot command. To do this, follow these steps:
- Power off your device completely.
- Press and hold the Volume Down and Power buttons simultaneously until you see the fastboot logo on the screen.
- Connect your device to your PC using the USB cable.
Step 4: Run the Mi Unlock Tool and Unlock the Bootloader
The final step is to run the Mi Unlock Tool on your PC and unlock the bootloader of your device. To do this, follow these steps:
- Extract the Mi Unlock Tool zip file that you downloaded earlier and run the miflash_unlock.exe file.
- Sign in with the same Mi account that you used to bind your device.
- The tool will detect your device and show its information. Click on Unlock to start the unlocking process.
- Wait for the tool to complete the unlocking process. You will see a message saying “Unlocked successfully” when it is done.
- Click on Reboot phone to restart your device.
Install Twrp
TWRP is a custom recovery program that allows you to backup, restore, and modify your Android device. To install TWRP on your Poco x6 5G, you need to follow these steps:
- Download and install the latest adb and fastboot drivers on your computer.
- Download Twrp.
- Extract the downloaded image file and move it to the platform-tools folder on your computer.
- Turn off your device and boot it into fastboot mode by pressing and holding the power and volume down buttons.
- Connect your device to your computer using a USB cable.
- Open a command window in the platform-tools folder and type the following command:
fastboot flash boot_a twrp.img
fastboot flash boot_b twrp.img
- Your device should reboot into TWRP recovery mode.
- Go to “Advanced” option in TWRP and select “Flash current TWRP”.
- Download the Magisk file and move it to your device’s storage.
- In TWRP, go to “Install” and select the Magisk zip file. Swipe to confirm the installation.
- Reboot your device and enjoy the root access and TWRP recovery.
Download Link
twrp is coming soon
